首页 > Products > Hydraulic calibration pump

Hydraulic calibration pump

The category:Hydraulic calibration pump
Type:

The measuring instrument TY700 is designed to manually generate up to 700bar

(without hose) for stable pressure source of pressure gauges, transducers and other

pressure pressure measuring instruments.

Recommended test fluids to be used with the measuring instrument are: Low viscosity

mineral based hydraulic oils

1)Carrying case dimension: 440mm×330mm×130mm

2)Measuring instrument dimension: 240mm×180mm×70mm

3)Measuring instrument weight: 1KG

4)Min. output pressure: 0bar

5)Max. output pressure: 700bar (without hose), Max. output pressure: 470bar(usehose6)

Medium: 15-22# Low viscosity mineral based hydraulic oils

7)Max. oil storage: 100mL

8)Pressure output interface: G1/4 on both sides of female thread interface, G3/8 on

the top

The max. pressure gauge of this equipment is 100bar, and the corresponding pressure

gauge can be replaced according to the customer's demand, the maximum pressure is

700bar.


THE STANDARD ACCESSORIES ARE AS FOLLOWS:

1)Carrying case

2)0-600bar pressure gauge

3)0-10bar pressure gauge

4)0-100bar pressure gauge

5)G3/8-male thread-G1/4 female thread reducing coupling for extended connection

6)G1/4-female thread-G1/4 female thread reducing coupling for extended connection

7)Two PT7 female connector for pressure measurement hose (M16×2)

8)Two G1/4-PT7 male connector for connecting the hose to the pressure measurement instrument

9)  One oilcan

10) Gasket

Hydraulic calibration pump






上一篇:没有了
下一篇:没有了